SWF/E-1506 Highlights

The SWF/E-1506 Automatic Embroidery Machine includes an LCD monitor as a standard feature. This full-color LCD control panel is easy to operate, plus you will be able to track the design as it sews and view the number of stitches per design on screen. The SWF/E-1506 is also equipped with a floppy disk drive and a USB port to connect a USB memory stick.

• Tubular Sash Arms
• Wide Cap Frame Clips
• Cap Gauge
• Cap Hooping Support Arm
• Cap Driver & Setting Screw
• Border Frame Clips
• Operational Manual
• Cap Manual
• Backup of Software on Disk
• Bobbin Winder
• Tool Kit with necessary screw drivers, wrenches, etc.
• Machine Grease
• Machine Oil and Oiling Bottle
• Foot Bolts and Pads

ACCESSORIES Tubular Sash Arms Wide Cap Frame Clips Cap Gauge Cap Hooping Support Arm Cap Driver & Setting Screw Border Frame Clips Operational Manual Cap Manual Backup of Software on Disk Bobbin Winder Tool Kit with necessary screw drivers, wrenches, etc. Machine Grease Machine Oil and Oiling Bottle Foot Bolts and Pads

FRAMES and HOOPS Border Frame 50cm x 45cm (19.7″ x 17.7″) 12 Jacket Back Hoops 42 x 44 cm (16.5″ x 17.2″) 12 Cap Frames Wide size: 36 x 7.4 cm (14.2″ x 2.9″) 48 Shirt Front Hoops (12) 18 cm (7.1″) (12) 15 cm (5.9″) (12) 12 cm (4.7″) (12) 9 cm (3.5″)

SWF/E-1506 Machine Gallery

SWF/E-1506 Video Gallery

SIZE and WEIGHT*

Dimensions (W, D, H)

398.6 x 128.5 x 172 cm (13.1′ x 4.2′ x 5.6′)

With Table: 398.6 x 161 x 172 cm (13.1′ x 5.3′ x 5.6′)

Weight*

Uncrated: 839 kg (1,850 lbs)

*This weight does not reflect the shipping weight due to dimensional weight used by the shipping companies.

 

FEATURES

Automatic Oiling System

The automatic oiling system allows for low maintenance and more production time.

Patented Arm Driving Unit

Patented arm driving unit, with a Presser foot driving mechanism, that is separate from the needle bar movement.

Convenient install & Uninstall of presser foot

Enables an extra variety of embroidery work to be preformed on machine

Expanded Memory Size

Store up to 100 designs with a basic memory capacity of 2 million stitches.

Mirror Image Conversion and Design Direction

Designs can be rotated from 0° to 359° in 1° increments. Designs can also be flipped horizontally or vertically.

Reduce and Enlarge Designs

Selected designs can be enlarged or reduced from 50% to 200% by 1% increments and in any direction.

General Repetition Work

One design can be repeated up to 99 times along X, Y and both directions.

Special Repetition Work

Several designs can be repeated up to 69 times at same time.

Thread Break Sensor

The machine detects when the upper thread breaks or the lower thread is out of the needle and automatically stops the machine.

Automatic Offset

The frame automatically returns to the offset point when the embroidery is finished to make it easier for you to switch the frames. You can select AUTOMATIC OFFSET at PARAMETER SELECT MODE to move the frame automatically to the desired point, making it easier to do appliques and emblems.

Manual Offset

Manual Offset allows the user to manually move the frame to a pre-selected point. This feature makes it easy to do applique or to change frames while embroidering.

Origin Return

Frame can returned to origin point of design during embroidery work.

Electronic Adjustable Presser Foot Height

Presser Foot height is adjustable according to embroidery material with just a touch of a button.

Internal X-Y Direct Driven System

Ultra Precise movement & control of X-Y pantograph. Superior Embroidery Quality

Ultra Heavy Duty Pantograph

Ultra Precise movement & control of X-Y pantograph. Superior Embroidery Quality

Non-Stitch Function

The frame and the needle bar can move back and forth by the units of 1, 100, 1000, and 10,000 stitches and by color without stitching.

Frame Reversal

When the thread breaks or runs out of track, you may move the needle bar back to the starting point of the design in the units of one to ten stitches.

Automatic Return

Frame will move back to its last position after power interruption. This function helps minimize stitch errors while embroidering.

Editing

Edit jump stitches, trims, and end points from the control panel.

Individual Head Operation

In the event of a thread break or other error, only the affected head will stop running. This keeps your machine running and helps to eliminate costly downtime.

Supports Many Design Formats

All E-Series embroidery machines support multiple design formats to help maximize your production capabilities.

3.53 Floppy Drive (Embedded)

The control panel includes an internal 3.53 floppy drive to help you transport designs to the embroidery machine quickly. 3.53 drive is compatible with both 2DD and 2HD disks.

USB Port

The USB port allows you to easily move designs to and from your embroidery machine using USB external storage devices.

Additional Information

Power: 220 VAC

Embroidery Area: 500 x 450mm (19.7″ x 17.7″)

Maximum Speed: 1,000 Stitches per Minute

Memory: 100 Designs or up to 2,000,000 Stitches

SWF/E-1506 Options

SWF East offers several devices and attachments for existing embroidery machines, among them the BORING and SEQUIN options.

For further information and additional specifications, please contact an SWF East Account Manager. Toll Free 877-793-3278.

BORING DEVICE

Boring is open-work incorporated into embroidered designs; a sharp-pointed instrument punctures, or bores, the fabric, and stitches are made around the opening to enclose the raw edges. When installing the boring device to the needle bar, make sure the tip of the blade is not touching your finger.

CORDING DEVICE

Cording: The Application which wraps colorful thread around a core thread which is simultaneously attached to a base material so the stitches cannot be seen. With our Cording device, you can achieve a thread thickness of 1.3mm to 2.5 mm.

SEQUIN DEVICE - SQ20

You may use any commercial sequin with the SWF Sequin device.

QUICK CAP CHANGE SYSTEM

An Exclusive feature from SWF. The Quick Cap Change System will save you time and make it easy to switch from flat embroidering to cap embroidering.

Quick Change Cap System

Exceeds industry standards for versatility, performance and price!

A new level of versatility and performance to meet the most demanding needs of today's embroiderers.

Features

The lastest innovation from SWF! The exclusive, patented Quick Change Cap System is a well crafted and user-friendly device that allows for fast production and efficiency. With a few simple steps, you can quickly change from flat to cap frames!

Technology

The Quick Change cap frame driver is designed to maximize performance during production and save you time. It meets the most demanding needs of embroiderers, which is to eliminate the tedious task of changing between standard and cap embroidering using tools. With this system, simply snap out the shirt or jacket hoop and snap in the cap driver. It's that easy! The driver is supported by a slide bearing, comprised of a series of precision ball bearings that ride on a steel pivot axle, while the movement is controlled by an innovative linear motion guide rail. This assembly creates the most advanced cap frame system in the industry, delivering unmatched ease of installation and operation.

For more information and pricing, contact an SWF East Account Manager.

JUST A FEW EASY STEPS

Elapsed time (30 seconds). Click here for demo.

Changing from flat to cap embroidery is easy!	Step 1
Step 2	Step 3
Step 4	Step 5

---

QUICK CHANGE CAP DRIVER VS. CONVENTIONAL CAP DRIVERS

Elapsed time (5 Minutes)

Step 1	Step 2
Step 3	Step 4
Step 5	Step 6
Step 7	Step 8
Step 9	Step 10
Step 11	Step 12