Call a consultant toll free
1-877-793-3278
SWF/A-W1201-100 Especificaciones
Wide border frame allows for embroidery on large surfaces for specialty projects.
TAMAÑO y PESO*
Size without table (w,d,h):
FEET - 8' x 8.5' x 5.5'
MILLIMETERS - 2,438 x 2,591 x 1,676mm
Weight * (uncrated): 140 lbs or 64kg
* Rounded to nearest half inch
** Este peso no refleja el peso de embarque debido a las dimenciones usadas por companies de embarque.
LCD CONTROL PANEL
The Standard LED Control panel has a memory capacity of storing 99 designs or up to 2 million stitches. You can ROTATE, SCALE UP/DOWN and TRACE designs and more.
Features
- Memory Capacity: 2 million stitch memory capacity and 99 design memory capacity
- Rotate, Mirror Image Conversion: All designs can be converted into symmetry by turning 0° - 359°.
- Scale Up/Down: Within the range of 50~200%, the machine can extend and reduce by 1% to X or Y direction.
- Built-in 3.5" FDD: FDD is installed in the machine, which can save 480,000 stitches / 233 designs at maximum per 2HD floppy disk so input and output for various designs are available. (Both 2DD and 2HD can be used).The machine can read and save disks with SWF format, which is compatible with different formatted designs from other company codes by automatic recognition. It is also very convenient to output data with the codes of other companies.
- Manual/Automatic Offset: During the embroidery work for appliqu} and frame change, the frame can be returned to the previous position with only simple key operation. If you designate automatic offset position in the setting mode, it can be returned to the previous offset position after finishing embroidery work.
- Origin Return / Frame Offset: During the embroidery work, the frame returns to the starting point of design, and if there is any problem occurred, you can make the frame go back for the correct embroidery work.
- Tracing: For accurate position of embroidery, the machine traces the outline of design before starting main operation.
- Automatic returns to the suspension point after power failure: When unexpected power failure occurs, it can search for the exact suspension spot automatically for continuous operation to prevent from inferiority of production.
- Floating: The frame can process both forward and backward without stitching by units of 1, 100, 1000 and 10000 stitches or by color code.
FUNCTIONS
EXPANDED MEMORY SIZE
The machine can store a maximum of 100 designs. The basic memory size is 2 million stitches.
GENERAL REPETITION WORK
The same design can be repeated up to 99 times along the X and Y axis.
SPECIAL REPETITION WORK
Several designs can be repeated up to 63 times at different angles and directions.
MIRROR IMAGE CONVERSION AND DESIGN DIRECTION
Rotate your designs from 0° to 359° and reverse the design on its X axis.
ENLARGE AND REDUCE DESIGN
from 50% to 200%.
AUTOMATIC SELECTION OF NEEDLE BAR
Select the order of the needle bar.
AUTOMATIC OFFSET FOR APPLIQUE and EMBLEMS
After the embroidery is finished, the frame returns to the offset point.
MANUAL OFFSET
You can manually move the frame to the pre-selected point to do appliques or change the frames during embroidery work.
FLOAT STITCH FUNCTION
Both the frame and the needle bar can move back and forth by the units of 1, 100, 1000, and 10000 stitches and by color without stitching.
FRAME BACKWARD
When the thread breaks or runs out of track, you can move the needle bar back to the starting point of the design in the units of one to ten stitches.
AUTOMATIC TRIMMING
The automatic trimming function, determined by the design and the machine set-up, enhances work productivity and quality of the finished product.
AUTOMATIC UPPER/LOWER THREAD BREAK SENSING
The machine detects when the upper thread breaks or the lower thread is out of the needle and automatically stops the machine.
AUTO DESIGN RECOVERY AFTER POWER FAILURE
When the power fails unexpectedly, the frame moves back to the exact point where the stitching stopped. This helps reduce the number of defects.
3.5" FLOPPY DRIVE (EMBEDDED)
A 3.5" floppy drive is embedded in the operation panel for you to read or store designs. Both 2DD and 2HD disks can be used.
EDIT FUNCTION
You can delete, change, or insert stitch data and function cades (jump, finish, trimming).
RPM
The screen indicates rpm.
FRAME MOVEMENT SPEED
You can adjust the frame speed to high, medium, or low.
UNUSED MEMORY
The screen indicates the memory available for use.
TAPE CODE COMPATIBILITY
2-binary and 3-binary tape codes can be edited.
AUTO-RECOGNITION OF OTHER COMPANIES DESIGN CODES